Join Us

When Should You Use a Split Core Current Transformer in Existing Electrical Systems?

Author: Harry

Nov. 18, 2026

When Should You Use a Split Core Current Transformer in Existing Electrical Systems?

Use a split core current transformer (CT) when you need to measure or monitor current in an existing installation and removing the conductor to fit a conventional solid-core CT would be impractical. Its hinged or separable core can be opened, positioned around an accessible conductor, and closed without disconnecting that conductor. This makes it useful for retrofit metering, energy monitoring, and equipment diagnostics, provided the CT fits the conductor, meets the electrical and measurement requirements, and can be installed safely.

Read more

A split core CT is not automatically the right choice for every retrofit. Before selection, check the system voltage, conductor dimensions, primary current range, secondary output, burden, accuracy needs, and installation environment. At SINAVA, we recommend confirming these details against the intended meter or monitoring device and the CT’s datasheet before specifying a product.

Key Takeaways

  • Choose a split core CT when a conductor is already installed and opening the circuit to fit a solid-core CT is undesirable or difficult.
  • Confirm aperture size, current ratio, secondary type, burden, accuracy, insulation rating, and compatibility with the connected instrument.
  • Installation should be planned around electrical safety and the CT manufacturer’s instructions; never leave an energized CT secondary open.
  • A split core design may trade some measurement performance or mechanical simplicity for easier retrofit access, so compare the specifications for the actual application.

How a Split Core CT Works

A current transformer produces a secondary current related to the current flowing through a primary conductor. In a split core model, the magnetic core separates so it can be placed around a conductor that is already in service, then closes to form a magnetic path. The CT’s secondary connects to a compatible meter, relay, or monitoring device, according to the product’s wiring and rating information.

The CT surrounds one conductor, not an entire cable containing both outgoing and returning currents, unless the application specifically calls for measuring residual or leakage current with an appropriate device. For ordinary load-current measurement, placing both the supply and return conductors inside the same CT can cause their magnetic effects to cancel. Confirm conductor arrangement and measurement purpose before installation.

When a Split Core CT Is a Good Fit

Retrofit metering without disconnecting the conductor

A split core CT is often a practical option when adding measurement to an existing distribution panel, machine, or branch circuit. It can avoid the need to remove a conductor from a terminal solely to slide a closed-core CT into place. Whether the conductor can remain energized during installation is a separate safety decision and must follow applicable procedures, site rules, and the manufacturer’s instructions.

Energy monitoring and equipment diagnostics

Consider this design when you need to add current inputs to an energy management system, a power meter, or a monitoring device and the existing conductors are accessible. It can also support load profiling or help compare current across equipment, if the selected CT and instrument provide the required measurement range and accuracy. For protection applications, verify that the CT is specifically suitable for the relay and fault-current conditions rather than assuming a metering CT will perform the same way.

Limited access or planned maintenance windows

Split core CTs can simplify work where conductor removal would require substantial coordination, equipment shutdown, or panel rework. They may also suit temporary or staged monitoring projects where a measurement point must be added with minimal changes to the existing wiring. However, limited access can make it harder to close and inspect the core properly, so the installation space still needs to be assessed.

When Another CT Type May Be Better

A solid-core CT may be preferable when the equipment is being designed or rewired and the conductor can be routed through the CT before termination. A closed core has no opening seam, which can be advantageous where the product’s accuracy, mechanical design, or environmental protection requirements favor that construction. The actual difference depends on the CT models and their published specifications, so compare datasheets rather than relying on a general assumption.

A split core CT may also be unsuitable if the conductor is too large, the available clearance is insufficient, the core cannot close fully, or the required accuracy and burden cannot be met by the available model. For very high current, sensitive measurement, or protective relaying, seek a model specified for that duty and confirm the complete measuring chain. If the conductor is inaccessible or the equipment has strict requirements for isolation and enclosure integrity, consult a qualified electrical professional about an alternative approach.

Link to SINAVA

What to Check Before Selecting a Split Core CT

Electrical and measurement requirements

Start with the nominal and maximum primary current, the connected instrument’s input type, and the required measurement range. CT ratios are product-specific; examples such as 100/5 A or 200/1 A indicate a primary-to-secondary current relationship, not a universal recommendation. The secondary output must match the meter or monitoring device, and the total connected burden must remain within the CT’s stated capability.

Check the specified accuracy class and operating frequency against the measurement purpose. Many electrical systems operate at 50 Hz or 60 Hz, but you should select a CT rated for the actual system frequency. For billing, control, or protection uses, accuracy and performance requirements can differ; confirm the applicable project specification and relevant local requirements rather than treating one accuracy class as suitable for every task.

Dimensions, voltage rating, and environment

Measure the conductor or busbar at the intended mounting point, including insulation, and compare it with the CT’s usable aperture dimensions. Allow room to open the core, close its latch, route the secondary leads, and maintain required clearances. The core must meet cleanly and fully; dirt, misalignment, or an obstruction at the joint can affect operation and should be addressed as instructed by the manufacturer.

Confirm the CT’s insulation and system-voltage rating for the installation. A 0.66 kV rating, where specified for a product, refers to an electrical voltage rating and should not be confused with the CT’s current ratio or measurement range. Also review temperature, humidity, enclosure, and mounting conditions against the product documentation.

Quick selection checklist

Check What to confirm
Primary conductor Conductor shape, dimensions, insulation, and available clearance
Current ratio Expected operating current and the compatible meter or device input
Secondary and burden Output type, wiring, connected load, and permitted burden in VA
Measurement purpose Monitoring, metering, control, or protection requirements
Installation conditions System voltage, frequency, environment, access, and safety procedures

Installation and Safety Considerations

Use qualified personnel and follow the site’s electrical safety procedures and the CT manufacturer’s installation instructions. Where practicable, de-energize and verify the circuit before fitting the CT; a split core design does not by itself make live installation safe. Check that the core halves align and latch as intended, and that the CT is secured without stressing the conductor or obstructing the panel.

For a conventional current-output CT, never leave the secondary circuit open while primary current is flowing. An open secondary can create a hazardous voltage and may damage equipment. Follow the product wiring diagram and the connected instrument’s requirements, and use an approved shorting or isolation method where the application and procedure call for one.

Common Selection Mistakes to Avoid

  • Choosing by aperture alone: A CT that fits physically may still have the wrong ratio, secondary output, burden, or accuracy.
  • Confusing voltage and current ratings: Check system-voltage suitability separately from primary current range and ratio.
  • Ignoring the measuring device: Confirm that the meter accepts the CT’s output and that the connected burden is within the CT rating.
  • Assuming all split core models are interchangeable: Construction, accuracy, environmental suitability, and installation details vary by model.
  • Overlooking secondary-circuit safety: Keep the secondary connected or safely managed in accordance with the product instructions whenever primary current is present.

Conclusion: Is a Split Core CT Right for Your Existing System?

Use a split core current transformer when you need to add current measurement to an existing electrical system and conductor removal for a solid-core CT is impractical, while the available model still meets the electrical, mechanical, and measurement requirements. It is a particularly useful retrofit option for accessible conductors in metering and monitoring projects. It is not a substitute for checking accuracy, compatibility, installation conditions, and safety.

Before requesting a quotation, prepare the conductor dimensions, expected current, system voltage and frequency, required secondary output, instrument details, installation environment, and intended use. SINAVA can review these application details and help identify suitable split core CT options, including whether a 0.66 kV-rated product is relevant to your system. Contact our team with your project requirements to discuss product selection and sourcing.

If you are looking for more details, kindly visit When Should You Use a Split Core Current Transformer in Existing Electrical Systems?.

2

0

Comments

0/2000

All Comments (0)

Guest Posts

If you are interested in sending in a Guest Blogger Submission,welcome to write for us!

Your Name: (required)

Your Email: (required)

Subject:

Your Message: (required)

0/2000