Slurry Pump Parts ✔ - Element Mining and Construction Oy

One of the challenges that our customers came to us with was the rapid wear of wet-end parts. A large gold-processing plant assigned us the task of increasing the operating time of the liners for their 10/8 slurry pump. Element’s specialists visited the customer’s site, examined the operating conditions, and determined that the liners’ short operating time was due to an incorrect choice of wet-end part material. Based on the collected data from the pump installation and slurry data, Element’s engineers proposed replacing the metal wet-end parts with natural rubber. This resulted in a 1.5-fold increase in operating time and a decrease of over 2 times in spare parts expenses for the processing plant.

Goto SUNBO PUMP to know more.

Are you interested in learning more about metso pump spare parts? Contact us today to secure an expert consultation!

Element supplied a set of wet-end parts to a large gold mining company in March of . Due to the high load of solids, as well as the very coarse and large size of ore after the primary mill, the equipment in the process plant experienced a significant wear rate at the mill discharge circuit. The average operating time of the OEM’s wet-end parts was 1,100 hours and they complied with all of the customer’s requirements. However, replacing these parts entailed high costs. Element provided wet-end parts made from High Chrome White Iron in accordance with their material standard. As a result, the first set of parts lasted for hours of operation, and the second and third sets demonstrated the same lifespan. Consequently, the customer was able to achieve the same amount of operation time as with OEM parts while incurring significantly lower maintenance costs.

If you want to learn more, please visit our website Gorman Pump Parts.