High Mast Light | Manufacturer - ZGSM

1. Multiple beam angles are available
Due to the high installation height of the high mast light, in order to effectively illuminate the ground, the beam angle is usually chosen not to be too big. According to the requirements of height and uniformity, different beam angles are required to achieve the standards of illuminance value and uniformity, especially various stadiums, live stadiums, professional stadiums, training stadiums, or amateur stadiums have different requirements for illuminance value and uniformity. Therefore, it is necessary to choose a high mast light with a variety of optic lenses.
ZGSM led stadium lights to use self-designed optical lenses with personal molds. There are 15 degrees, 30 degrees, 45 degrees, 60 degrees, and asymmetric spectrums to choose from; if you want to buy high mast lights, we will have a professional lighting design team Provide lighting simulation, welcome to contact ZGSM team.
2. High-level Ingress and Impact Protection
IP and IK grades are one of the most important parameters of outdoor lights, especially IP grades. fixtures exposed to the outdoors for many years have to withstand the accumulation of wind and rain. If the protection level is not enough, it is easy to cause water to enter the luminaire, the internal electronic components will be burned out. The maintenance cost of high mast lights is very dangerous and expensive, so the protection must be high level.
ZGSM high mast light with IP66 waterproof rating, water is difficult to enter into lights in any angle installation, in addition, the degree of protection against mechanical impacts also reaches IK10.
3. Remarkable Payback
ZGSM engineers try different LED chips to achieve higher light efficiency, our high mast lamp is designed to reach the limit of energy-saving, direct transformation of traditional HID lamp can achieve a quick and significant return. Usually, our 560W high mast light can directly replace W HID light, and the energy-saving rate reaches more than 70%.

Read more

Lampshining supply professional and honest service.

1. Choose the high quality LED chips and LED driver
High-quality LED chips and LED drivers can provide high luminous efficiency, give low light decay, and have a very low failure rate. we highly recommend that when you purchase stadium lights, It is best to choose high-quality LED chips and drives since high mast lights are expensive to maintain.
2. Choose the proper optic lens
When the football lighting lights have a large beam Angle, ground brightness is lower, so it is suitable for small venues with lower heights. The smaller beam angle has lower uniformity, but the ground brightness is higher, so it is more suitable for higher installation places. Therefore, in order to meet the lighting requirements of different venues, we generally recommend two beam angles be used together. ZGSM’s high pole lights are available with 15°, 30°, 45°, and 60° beam angles. Please tell us your specific requirements, we can provide you with a complete solution.
3. Choose high-level IP and IK rating
As we all know, most of the high mast lights are installed outdoors, so they are easily affected by water and humidity. At the same time, because stadium lights are mostly used in places with a height of 8-35m, thunderstorms will also affect the lights. In ZGSM, our high pole lights have IP66 and 10KV surge protection, which can avoid these.

The company is the world’s best LED high mast light manufacturer supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.