Everything You Need To Know To Find The Best F Port Valve Balls

Want to learn more about ball valves? You’re in the right place! These handy gadgets are essential in plumbing systems for managing the flow of water, gas, and other fluids.

YIYUAN contains other products and information you need, so please check it out.

Ball valves are used in various applications due to their simple design and dependable performance. We’ll examine how they function, the many varieties available, and why they might be the ideal option for your plumbing problems. So, let’s get started and learn all about them. 

How does a ball valve work?

Ball valves employ a hollow ball to regulate the flow of liquids or gases. When the valve is open, the hole in the ball allows fluid to flow through. When it is closed, the flow ceases altogether. A spindle is used to turn the ball, which is fitted into a slot. The spindle is controlled by a lever that opens and shuts the valve.

The spindle is inside the valve body neck and contains many seals to prevent leakage. Furthermore, the ball is maintained in position by two chairs on either side. These seats have a tight seal, so nothing spills out.

Types of Ball Valves 

Automatic ball valves

Some valves can be operated with an electric or pneumatic actuator rather than a handle. These actuators connect directly to the valve stem and rotate it a quarter turn. The ISO standard flange connection is the most often used method for connecting an actuator to a valve.

With an actuator, you may operate your ball valve remotely or with a controller, allowing the valve to function as an automated shut-off. A spring-actuated ball valve, also known as a spring-loaded or spring return ball valve, opens or closes the valve without electricity.

The actuator then maintains the valve’s open or closed position. These types of valves are useful for saving energy and safety reasons. You can get these from every ball valve manufacturer. 

Brass Ball Valves 

Brass is the most common material for valves. It is a copper-zinc alloy with good mechanical qualities. Brass valves are used for various applications, including drinking water, gas, oil, air, and other liquids. 

However, chloride solutions such as saltwater or demineralized water can induce a condition known as dezincification. This is a kind of corrosion in which zinc is lost from the alloy, leaving the brass weak and porous. Despite this, brass is ideal for air ball valves and plumbing ball valves.

Stainless Steel Ball Valves

Stainless steel is ideal for use in corrosive and severe conditions. This makes it an excellent solution for saltwater, swimming pools, osmosis systems, high temperatures, and various chemicals.

 Most stainless steel is austenitic, with the most common types being 304 and 316. Type 316 provides the highest corrosion resistance, whereas Type 304, sometimes known as 18/8, has 18% chromium and 8% nickel. Type 316 has 18% chromium and 10% nickel, also known as 18/10.

One thing to know is that stainless steel valves often require more power than brass or PVC valves. This is critical when operating a stainless steel valve with an electric or pneumatic actuator.

PVC Ball Valves 

PVC, which stands for polyvinyl chloride, is often cheaper than other materials (except for ISO-top valves) and is widely used in irrigation, water supply, drainage, and corrosive substances. 

PVC resists most salt solutions, acids, bases, and organic solvents. However, it’s unsuitable for temperatures above 60 °C and can’t handle aromatic and chlorinated hydrocarbons. PVC isn’t as strong as brass or stainless steel, so PVC ball valves have a lower pressure rating.

High-Pressure Ball Valves 

High-pressure ball valves are designed to withstand extremely high fluid pressures, often about 500-700 bars. When the valve is larger, it can tolerate less pressure, and vice versa. These valves are highly durable and are utilized in pipe systems with uniformly high pressure. If it is a manual valve, turn the lever 90 degrees to make it work. However, if it is motorized, it will activate with an electric signal.

These valves are manufactured from materials like carbon steel and stainless steel 316. Or more durable materials, such as Duplex, for pieces like the stem, ball, and seat rings. This allows the valve to handle high pressure and the maximum torque the actuator can provide.

High-pressure ball valves are available in the following connection types:

1. National pipe thread (NPT) threaded
2. Compression type (DIN /ISO -1)
3. Welding end
4. British standard pipe parallel (BSPP) threaded

What’s the difference between 1, 3, and 3-piece Ball Valves?

One-piece Ball Valve

As they are made of a single piece of material, one-piece ball valves are extremely durable and have a low leak rate. However, they have a lower port size due to design than the inner diameter of the pipe they connect to.

As a result, there may be a little slowdown in the flow and a dip in pressure. Replacing them requires removing the entire valve, which may be a pain.

Furthermore, it costs less to manufacture these valves. Therefore, replacing them completely is always an option rather than attempting to fix them. 

Pros of One-piece Ball Valves 

• Inexpensive 
• Less chances of leakage 

Cons of One-piece Ball Valves 

• Smaller port size results in lower pressure
• Repairing can be tricky

Two-piece Ball Valve

Two-piece ball valves consist of two components linked together using bolts or threaded connections. Typically, one part comprises the body and one end connection, while the other holds the trim to the valve and includes the second end connection. This setting enables two-piece ball valves to have port sizes that match the connecting pipes. When this occurs, they are known as full port valves.

Because full port valves provide no pressure loss, they can withstand significantly larger flow rates.

Additionally, two-piece valves are designed to bear pressure from both sides, making them ideal for stopping fluid flow in both directions, a process known as bidirectional flow shutdown. 

Moreover, two-piece ball valves are often the most cost-effective option among full port valves. 

Pros of Two-piece Ball Valves

• Full port size results in a higher pressure 
• Relatively cheaper as compared to other full port options

Cons of Two-piece Ball Valves 

• The whole assembly needs to be removed to repair 
• More expensive than one-piece valves 

Three-piece Ball Valve

Three-piece ball valves are a trio of parts: two end caps and a body. Unlike the other types, you can separate the body from the end caps. This makes them super easy to clean and service whenever needed. Well, these valves are the best for cleaning things up very often.

They’re pretty popular in places like the pharmaceutical and food/beverage industries, where cleanliness is a top priority. While they might cost a bit more upfront, they’re totally worth it. Why? Because they come with added functions that are absolute must-haves for specific jobs. So, think of them as the superheroes of valves – a bit pricier, but totally worth the extra dough when you need their special powers.

Pros of Three-piece Ball Valve

• Easier maintenance and upkeep 
• Long-lasting with regular maintenance

Cons of Three-piece Ball Valve

• Most expensive of all 

Connection types for ball valves.

Standard

Standard ball valves are pretty straightforward. They have a ball, seats, a housing, and a lever to spin the ball. Additionally, they have two, three, or four ports in varying sizes, which might combine male and female threading. Many ball valve manufacturers offer this type of valve.

Flanged 

Flanged ball valves are a bit fancier. They hook up to your pipes using flanges designed according to a standard. Their full-bore design allows them to provide you with a high flow rate.

Ball valves are, therefore, suitable for any plumbing task, regardless of whether you choose the traditional threaded design or flanged valves.  

Socket Weld Ball Valves

Socket weld ball valves are a specialized type of ball valve designed for high-pressure applications and permanent pipe connections. Unlike standard or flanged ball valves, socket weld ball valves use a socket weld connection, where the pipe is inserted into a recessed area at the end of the valve. This design ensures a robust, leak-proof joint, ideal for systems with common high-pressure and temperature variations.

Sizes;

Final Thoughts 

Ball valves use a simple design based on a ball or sphere that is ported or drilled out to provide a flow path for gases and liquids moving through the valve. These ported valve balls are attached to handles that require only a quarter turn to allow full flow or shut off the flow, but they are unsuitable for throttling flow. The ball valve design creates a relatively low pressure drop across the valve.

Miniature ball valves come in a wide selection of specifications and options. These choices provide the flexibility to choose the best ball valve for any fluid or gas handling application. Decisions to make include:

• Flow path and number of ports
• Sizing and flow efficiency
• End connection types
• Materials
• Technical specifications

#1: If you need a two-port ball valve, does it need to control flow in both directions?

Flow Paths and Ball Valve Ports

One-way or unidirectional vs. two-way ball valves
The most common miniature ball valve is the two-port ball valve with two ports or connections. The option of choosing between a one-way or two-way ball valve sometimes shows up with metal ball valves designed to handle relatively high pressures, usually about 200 psi and higher. The difference between a one-way and a two-way ball valve is that flow direction matters.

One-way ball valves have a flow direction. This orientation is because one-way ball valve designs only seal and handle pressure flowing in one direction. A one-way valve ball has only one seat for sealing against the ball. Besides providing the sealing surface, valve seats also provide a surface that uniformly distributes force pressing against the ball.

Not only do one-way ball valves not seal against upstream pressure, but they also do not hold up well to the wear caused by this upstream pressure. Despite these limitations, unidirectional ball valves are a practical option because of their lower cost.

Two-way ball valves can adequately handle the pressurized flow from either port without leaking or premature wear to the valve components.

Three-way diverter (L-port) vs. mixing (T-port) ball valves

Miniature three-way ball valves usually come as one of two types based on the design of the balls inside the valve: L-port and T-port. The two ball port types also come in either an upright (vertical) or horizontal orientation.

L-port three-way ball valves (vertical and horizontal) have “L” shaped holes bored through the valve balls. T-port three-way ball valves have a “T” shaped passage running through the ball. L-port valves, sometimes called diverter valves, divert flow between different destinations.

T-port and L-port horizontal ball valve flow patterns schematic.

L-port ball valves may or may not have an “off” or closed position depending on whether the valve body includes stops that limit the rotation of the handle. Horizontal T-port valves do not have an “off” or closed position. Vertical or upright T-port three-way valves do have an off or closed position.

Get a more detailed look at three-way ball valve flow patterns >>

#2: Multi-port ball valves offer the most customization options.

Four-way and five-way ball valves

Ball valves also come in four-way and five-way designs with either four or five possible flow connections. The most common ball porting for these multi-port valves makes them suitable for diverting or mixing flow. There is usually an option for blocking one of the ports to add shutoff positions.

Four-way ball valves have more complex valve ball porting than three-way valves. The most common four-way ball porting is based on a five-way ball valve with the common port plugged. This option leaves the valve with two separate right-angle flow paths in the same plane running through the ball. Manufacturers usually list them as X-port valves. Turning the handle of these four-way ball valves diverts two different flow paths coming into the valve flow simultaneously to two alternate destinations.

The simplest five-way ball valves are diverter valves with an “L” or 90-degree hole that allows flow between the bottom or common port and one side port, but none of the other side ports. Five-way ball valves can have one port plugged to add an off or closed flow position.

For more information, please visit F Port Valve Balls.

Because of the customization flexibility of five-way ball valve bodies, valve balls for four-way and five-way valves come with more ball flow patterns than just L, T or X.

Four-way and five-way ball valves can be customized for various mixing options. Flow pattern options include:

• X-port flow
• L-port flow
• TT-port flow
• LL-port flow
• and more

Customized multi-port valve ball porting applications:

• Mixing
• Exhaust
• Diverting
• Selecting

Ball valve types and designs takeaways:

• Know whether you need a flow cutoff position
• Know the number of open valve ports the application requires
• Know whether the valve is for mixing, diverting or some other purpose
• Miniature ball valve types and porting have a lot of variations, so always ask about options

#3: For maximum flow, use a full port ball valve.

Ball Valve Design and Flow Efficiency

What is flow efficiency?
Flow efficiency measures how little or how much flow resistance there is as a fluid or gas passes through a valve, fitting or piping.

Right-angle ball valves create some flow turbulence and thus more resistance to flow than straight valves. Straight ball valves also have a relatively lower pressure drop across the valve than other types of valves. Full port or full flow ball valve designs provide even greater flow efficiency.

Full port ball valves have valve balls with holes ported through them with the same inner diameter as the pipe or tubing connected to the valve. Standard port ball valves use balls with smaller diameter ports than the flow coming into and leaving the valve. This constricted flow decreases flow efficiency and creates a higher pressure drop across the valves.

Full port versus standard port ball valves:

• Full port valves are physically larger
• Full port ball valves are more expensive
• Full port ball valves are more efficient and have higher flow rates than standard port ball valves

Find out more about Full Port Ball Valves vs. Standard Port ball valves >>

Flow efficiency takeaways:

• Ball valves by design have good flow efficiency
• Full port ball valves have the highest ball valve flow efficiency

#4: End connection options provide design flexibility and easier installation.

Miniature ball valves come in many connection types. These connection options provide easy installation and replacement:

• Hose barb
• Pipe thread
• Compression
• Push-in or push-to-connect

Hose barb, barbed or barbed insert connections

Valves with one or more hose barb connections are popular because they are considered tool-free and are quick to install. Hose barbs are designed for use with flexible plastic tubing.

Hose barb connection takeaways
Hose barb connections are known for being particularly leak resistant. Be aware that trouble-free connections require:

• Matching the hose barb design with the recommended tubing durometer
• Matching the tubing inner diameter to the hose barb size for the application

Find out more about the design and function of hose barb connections >>

Find out more about flexible tubing durometer and why it matters >>

Pipe thread connections

Fluid and gas handling valves and fittings commonly use threaded pipe connections because they are solid and leak-tight when properly installed. Most miniature ball valves available in North America come with NPT pipe thread. NPT (American National Standard Taper Pipe Thread) are tapered pipe threads and rely on a combination of thread sealant and a thread design that creates an interference fit to help make a tighter, stronger connection.

Threaded connection takeaways:

• Pair the same pipe thread type to ensure tight, leak-free connections
• Tapered pipe threads require properly applied thread sealants for leak-free connections
• Straight pipe threads require the use of a gasket, rubber washer, O-ring or sealing washer to create a tight seal
• Dissimilar materials increase the chance of overtightening and damaging or splitting female threaded ends

Compression connections

Compression connections connect rigid and semi-rigid plastic or thin-walled metal tubing to fittings such as valves or tubing unions. This type of connection is useful because it can effectively connect two tubing sections not made of the same material. It can also connect a tubing made of a different material than the fitting. As a bonus, it creates no flow restriction.

Compression fittings have an outer compression nut with a tapered seat, a barrel-shaped compression ring (ferrule) with tapered ends and a tapered seat on the receiving end of the fitting.

Properly tightening the compression nut presses the ferrule ends evenly into the seats inside of the compression nut and the fitting. Additional tightening deforms the ferrule, compresses it around the tubing, fills the space between the tubing, nut, and receiving end of the connection and seals the connection. Generally, do not reuse ferrules because they deform during the installation process.

Compression connections require proper installation for leak-free seals. Overtightening can cause leaks. A good rule of thumb for assembling compression connections is:

1. Cut the tubing squarely and evenly and debur the end
2. Slip the nut and then the ferrule over the tubing end
3. Insert the tubing into the fitting until it bottoms out
4. Hand tighten the compression nut until it is snug
5. Tighten the nut about one-half turn more using a wrench
6. Allow flow and see if there is any weeping from the connection
7. If there is weeping, gradually tighten the connection until the weeping stops

Always follow manufacturers’ durometer specifications when using plastic tubing with compression connections. Plastic tubing walls must be stiff enough (higher durometer) to not collapse or move away from the ferrule when compressed. If softer tubing (lower durometer), use a tubing insert to reinforce the tubing wall.

Tubing minimum acceptable wall thickness is also necessary for metal tubing and rigid plastic tubing. With softer plastic tubing, the tubing inner diameter should match the tubing insert.
 

Compression connection takeaways:

• Careful installation of compression connections ensures leak-free seals
• Know the manufacturer requirements for tubing inner diameter and wall thickness
• Follow manufacturer durometer recommendations when using rigid or semi-rigid plastic tubing

Push-to-connect or push-in connections

Push-in or push-to-connect connections are a type for connecting metal or rigid and semi-rigid plastic tubing to unions and fittings such as ball valves without the use of tools, soldering or adhesives.

The working parts of push-in connectors are:

• An elastomer O-ring for sealing the connection
• A metal ring with gripping teeth that hold the tubing in place
• A tubing stop that indicates the tubing has been pushed far enough into the connection
• A release ring for disengaging the gripper teeth, releasing the tubing to remove it from the connection

Installation requirements for leak-free, reliable push-in connections:

• Plastic tubing must meet manufacturer durometer requirements
• Cut tubing ends squarely and evenly
• Properly debur the tubing ends
• Insert the tubing end into the fitting until it bottoms out at the tubing stop
• The outer tubing surface inside the fitting connection must be smooth with no scarring for the O-ring to seal properly

Push-in connection takeaways:

• Leak-free connections that will not pull apart require proper installation
• Follow manufacturer durometer recommendations when using rigid or semi-rigid plastic tubing
• Refresh tubing ends by cutting off scarred sections before being reusing the tubing and reinstalling the connection

#5: Materials matter because of chemical compatibility and food and potable water contact

Ball Valve Materials

Even though ball valves have a simple design, they all contain internal components. These components may be of different materials than the valve body. Material differences affect the valve’s compatibility with various chemicals, chemical mixtures and gases passing through it.

Be aware of which valve components will contact the fluids passing through the valve. These are sometimes called wetted parts.

Typical ball valve components:

• Body
• Stem
• Seals
• Seats
• Handle
• Packing

Ball valve materials for potable water or food contact

Materials that come into contact with foods and potable liquids are subject to regulatory control.

Manufacturers of commercial food equipment and food processing equipment used in the United States are responsible for using materials that comply with FDA regulations. Rules cover both raw materials and the appropriate end-use or real-world application of components made from these materials. Appropriate end-use rules consider factors such as exposure time, temperature, and acidity.

The NSF sets standards for materials that come into contact with drinkable water in the United States. They base these standards on testing for substances that can leach into drinking water from a valve's interior or wetted surfaces.

US materials and components standards for foods and potable water:

• FDA Code of Federal Regulations Title 21 parts 170 through 199
• NSF/ANSI/CAN Standard 61 Drinking Water System Components
• NSF/ANSI Standard 51 Plastic Material and Components Used in Food Equipment

When using valves for food and potable water applications, be sure the manufacturer clearly states that they make their valve from compliant materials or materials approved for food or potable water contact.

A particular application may require an NSF certified valve. If so, the manufacturer may provide this NSF certification information, so ask. NSF approved food contact materials are also FDA compliant.

Find out more about materials that are safe for direct food contact >>

An example of the effect of different ball valve component materials

Ball valves often use soft seat designs where an elastomer or plastic is the seat material. Using these softer materials provides a better seal that is more resilient, lighter and less expensive than a hard metal seat. Because of that polymer seat, a metal ball valve with a polymer seat will have an upper working temperature limit.

Ball valve materials takeaways:

• Plastics tend to be more corrosion resistant than metals
• Metal valves tend to have higher burst pressures than plastics
• Metal valves tend to have higher operating temperatures than plastics
• Food processing, contact and potable water applications have special material requirements that may include NSF certification

#6: Understand the maximum temperature and pressure requirements.

Technical Specifications

CWP, Cold Working Pressure
CWP is the maximum working pressure a valve can handle at temperatures between -20°F to 100°F (about -29°C to 38°C).

Operating temperature range
A valve used within its operating or material temperature range will not suffer damage or failure to any of its components or have a shortened working life.

Maximum operating pressure and temperature
The maximum safe operating pressure or PSI rating of a valve is provided based on its maximum safe operating temperature.

Blow out proof stems
Miniature ball valves with blow-out proof stems have mechanical design elements that prevent high-pressure surges from blowing the valve stem out of the valve body.

Cv (flow coefficient) and flow efficiency
Cv stands for flow coefficient. It represents how efficiently a gas or liquid can flow through piping, a fitting or a valve. Many manufacturers provide ball valve specifications, including their flow coefficient. If the Cv number of two valves is known, a higher Cv number means a valve provides a higher flow under the same operating conditions.

#7: Use only ball valves designed and certified for applications involving steam and combustible gases.

Dedicated ball valve types

WOG, Water, Oil or Gas
WOG is an older term that is no longer widely used. In general, it simply indicates that a ball valve is suitable for general use and can handle water, oil or gas but not steam or combustible gases. Ball valves for use with combustible gases have specialized additional design elements and certifications that approve the valves for this use.

WSP, Working Steam Pressure
WSP is the maximum steam pressure a ball valve can handle. Generally, no miniature ball valve will be suitable for use with steam unless the manufacturer clearly says it is and provides the Working Steam Pressure. SWP, Steam Working Pressure has the same meaning.

Technical specifications takeaways:

• Know the critical ball valve technical specifications needed
• If appropriate, look for third-party testing and quality assurance certification
• Don't hesitate to ask us questions if a required specification is missing or not clearly explained

Ball Valve Selection Final Thoughts

Ball valves are simple, sturdy shutoff valves that can be closed with a quick quarter-turn of the valve handle. They are reliable and work even after long periods of idleness. In contrast to industrial ball valves, miniature ball valves come with a broader range of material and design options. Look for and ask about our miniature ball valve options to find the best choice for an application.

The company is the world’s best X-Port Valve Balls supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.