Double Padel Court: A Complete Guide to Design, Dimensions, Costs, and Installation

A double padel court is the standard padel court designed for four players, with two players on each side of the net. For a regulation-oriented project, I normally begin with an internal playing area of 20 m long × 10 m wide, together with sufficient space around the structure for access, maintenance, drainage, lighting, and local safety requirements. The final design should be checked against the current rules of the International Padel Federation (FIP), the site’s building regulations, and the intended operating model.

You can find more information on our web, so please take a look.

This guide explains how I evaluate a double padel court from concept to installation. It covers dimensions, structural and material options, site preparation, lighting, cost planning, supplier selection, and common purchasing mistakes. Because costs and approvals vary significantly by country, the figures below should be treated as early-stage budgeting guidance rather than a formal quotation.

Who This Guide Is For

I have prepared this guide for sports club owners, hotel developers, schools, recreation operators, property developers, contractors, and distributors evaluating a double padel court. It is also useful for buyers comparing indoor, outdoor, panoramic, fixed, and customized court solutions. The information is intended to support early specification and supplier discussions, not to replace structural engineering or local permitting.

A double court may be installed as a single facility or as part of a larger padel project. Buyers planning two or more courts should consider circulation, shared reception areas, player waiting zones, equipment storage, electrical distribution, and maintenance access at the master-planning stage. These shared requirements can influence the total project cost more than the court frame alone.

What Is a Double Padel Court?

A double padel court is an enclosed court used for doubles play, which is the dominant format in padel. The playing surface is rectangular, with a net dividing the court into two equal halves. Glass or other approved enclosure panels, metallic posts, mesh sections, doors, lighting supports, and artificial turf work together to define the playing environment.

The word “double” normally refers to the number of players, not to two separate courts joined together. A standard doubles court therefore has a 20 m × 10 m internal playing area, giving approximately 200 m² of playing surface before adding circulation and service areas. I recommend confirming this terminology with the supplier before requesting a quotation.

Core Functions of the Court Structure

• Playing enclosure: The walls and mesh keep the ball within the designed playing area while supporting the rules of padel.
• Player access: Doors provide controlled entry and should be positioned according to the approved court design and local safety requirements.
• Ball rebound: Glass and mesh sections influence visibility, rebound behavior, and maintenance requirements.
• Lighting support: Columns and fixtures provide illumination for training, recreational use, or scheduled competition.
• Load transfer: The steel structure transfers enclosure and environmental loads into the foundations and ground system.

The court should be treated as an engineered assembly rather than a collection of independent panels. The foundation, anchors, frame, glass, mesh, lighting columns, fasteners, and drainage must be compatible. A low purchase price can become expensive if the site requires later reinforcement, relocation of anchors, or replacement of unsuitable components.

Standard Double Padel Court Dimensions and Specifications

The most important specification is the internal court footprint. FIP rules identify the standard padel court as 20 m long and 10 m wide, with the net positioned across the center. The net height is commonly specified at 0.88 m at the center and 0.92 m at the ends, subject to the applicable edition of the rules and event requirements.

Enclosure heights depend on the court design and the relevant regulations. Buyers commonly encounter wall and mesh systems around 3 m to 4 m high, but the exact arrangement must be confirmed from the approved technical drawing. If an overhead or fully covered solution is proposed, I treat it as a separate structural and planning issue rather than assuming that a standard open-top court can be adapted without engineering review.

These reference values are useful for preliminary planning, but they do not replace the manufacturer’s technical drawing. I also ask whether the dimensions exclude doors, posts, external bracing, lighting columns, and maintenance access. The FIP Rules of Padel should be used as the primary reference for official playing requirements, while the local authority should govern structural, electrical, fire, and accessibility matters.

Source: International Padel Federation, official padel rules and regulations resources.

Types and Material Options

Standard Fixed Court

A standard fixed court is usually installed on a prepared foundation and remains in one location for long-term operation. It is often the most straightforward choice for clubs, hotels, and permanent sports facilities. The main design variables include steel protection, glass specification, mesh arrangement, turf system, lighting, color, and access doors.

Panoramic Court

A panoramic court uses a more open visual arrangement, often with reduced visual obstruction at selected corners or rear sections. This option can improve spectator visibility and create a more premium appearance for commercial venues. I would not assume that a panoramic design is automatically stronger or more suitable; the buyer should compare glass support details, frame geometry, installation tolerances, and replacement procedures.

Indoor Court

Indoor installation protects the court from direct exposure to rain, snow, and ultraviolet radiation, but it does not eliminate structural or maintenance considerations. The building must provide adequate clear height, ventilation, drainage control, electrical capacity, fire compliance, and access for glass and steel components. Condensation and indoor humidity can also affect metal finishes, turf performance, and visibility if ventilation is inadequate.

Outdoor Court

An outdoor court requires a site-specific review of wind exposure, rainfall, ultraviolet exposure, soil conditions, drainage, and corrosion risk. I usually recommend that buyers specify the intended environment before choosing coatings and fasteners. Coastal areas, industrial locations, and regions with heavy rainfall may require more careful corrosion protection and maintenance planning than sheltered inland sites.

How to Design and Install a Double Padel Court

1. Confirm the Project Objective

First, I identify whether the court is intended for private use, hotel recreation, public rental, club membership, school activity, tournament hosting, or resale. The operating model affects the required durability, lighting, access control, branding, spare parts, and maintenance plan. A court for high daily utilization should not be specified in the same way as a court used occasionally by a private facility.

2. Survey the Site

The site survey should record available length and width, ground levels, soil conditions, drainage routes, utility locations, access for delivery vehicles, and the location of nearby buildings. A 20 m × 10 m playing area is not the complete land requirement because foundations, doors, lighting columns, walkways, and service clearance need additional space. I ask the supplier and local engineer to agree on the external layout before concrete work begins.

3. Select the Foundation and Base System

The court may require a reinforced concrete slab, isolated footings, perimeter foundations, or another engineered base depending on the design and site. The supplier should provide anchor positions, allowable tolerances, concrete requirements, drainage details, and installation loads before construction. I do not recommend pouring a generic slab without checking the court’s anchor layout, because small dimensional errors can complicate glass and frame installation.

4. Choose the Enclosure and Finish

At this stage, the buyer selects glass panels, mesh panels, posts, doors, coatings, fasteners, and color finishes. Tempered safety glass is widely used in padel courts, but the exact thickness, edge treatment, support method, and applicable safety standard should be stated in the technical offer. For metal components, I compare coating systems and corrosion protection according to the installation environment rather than selecting by color alone.

5. Specify Turf, Drainage, and Lighting

The playing surface should be selected together with the base flatness, drainage plan, turf backing, infill, and expected maintenance schedule. Artificial turf products may differ in pile height, fiber shape, stitch rate, backing construction, and infill requirements, so a simple “green turf” description is not sufficient for procurement. Lighting should be specified by illuminance, uniformity, glare control, fixture position, power load, and local electrical requirements rather than by wattage alone.

Link to Rayjun

For example, a project might use multiple LED fixtures rated at 100 W to 300 W each, but the correct wattage depends on fixture efficiency, mounting height, beam angle, court layout, and the target lux level. I ask for a lighting layout or photometric calculation when evening commercial operation is important. The exact target should be set by the operator, local code, and any applicable competition standard.

Source: The International Commission on Illumination (CIE) provides internationally recognized lighting terminology and measurement principles; see its official technical resources.

6. Install, Inspect, and Commission

Installation normally proceeds from foundation verification to frame assembly, glass and mesh installation, net installation, turf work, lighting, accessories, and final inspection. The team should check anchor alignment, glass seating, bolt torque, door operation, mesh tension, turf seams, drainage, lighting operation, and clearance around the court. I recommend recording photographs, component serial information where available, spare parts, cleaning instructions, and maintenance responsibilities at handover.

Key Decisions When Selecting a Double Padel Court

The first decision is whether the quotation is for a complete court package or only the enclosure. A complete package may include the frame, glass, mesh, doors, net, turf, lighting, transport, installation, and commissioning, while other offers may exclude foundations, electrical work, civil works, tax, and local permits. I always request an inclusion-and-exclusion schedule to make quotations comparable.

The second decision is how much customization is genuinely required. Custom colors, logos, modified doors, special lighting columns, and non-standard layouts may support branding, but they can increase engineering review, minimum order quantities, production time, and replacement complexity. For a first project, I usually prioritize standard components with documented replacement availability unless the site or brand strategy requires a custom solution.

Supplier Evaluation Checklist

• Does the supplier provide a dimensioned general arrangement drawing?
• Are internal and external dimensions clearly separated?
• Are glass type, thickness, edge treatment, and fixing details specified?
• Are steel grade, coating system, fasteners, and corrosion protection described?
• Does the quotation identify turf, infill, drainage, net, doors, and lighting inclusions?
• Are foundation drawings and anchor templates available before civil work?
• Does the supplier explain installation responsibilities and site requirements?
• Are spare glass, mesh, turf, fasteners, and lighting components available?
• Can the supplier provide product documentation without making unsupported certification claims?
• Are warranty conditions, exclusions, inspection steps, and response procedures written clearly?

I also evaluate communication quality before placing an order. A supplier that asks about wind conditions, site access, foundation type, lighting use, and local regulations is usually better prepared to manage project variables than one that only provides a product photograph. The buyer should request drawings and technical answers in writing, because verbal assumptions can create disputes during installation.

Double Padel Court Cost Planning

The total budget normally includes more than the court kit. Major cost groups may include the court structure, glass and mesh, artificial turf, lighting, foundation and civil works, drainage, electrical installation, transport, unloading equipment, installation labor, permits, taxes, and future maintenance. A supplier quotation should show each group separately whenever possible.

For early planning, I use a cost model rather than a single universal price. A basic project may have a lower equipment cost but higher civil or electrical work, while a panoramic or customized project may increase manufacturing and installation costs. Because country, specification, freight distance, site access, and labor rates vary widely, I do not present an unsupported fixed market price as a guaranteed budget.

MOQ and Lead Time

For a single project, the minimum order quantity may be one complete court, but this must be confirmed because custom colors, branded components, and special engineering can create separate minimum quantities. Manufacturing lead time is also project-specific and may change with glass availability, production capacity, drawing approval, and seasonal demand. I recommend asking for a schedule divided into drawing approval, production, dispatch, transit, and installation.

Rayjun can support B2B buyers by reviewing the project brief, clarifying the required court configuration, preparing a specification-based quotation, and coordinating metal building material requirements for the proposed solution. The final scope should be confirmed through technical drawings and a formal commercial offer. Buyers can improve quotation accuracy by providing the country, number of courts, indoor or outdoor location, site dimensions, preferred finish, lighting requirement, delivery port, and installation expectation.

Common Double Padel Court Purchasing Mistakes

One common mistake is budgeting only for the visible court package and ignoring foundations, drainage, transport, electrical work, and installation. Another is comparing prices without checking whether one supplier includes lighting and turf while another excludes them. I advise buyers to compare a complete bill of materials and a written scope before selecting the lowest nominal price.

A second mistake is starting civil construction before receiving the supplier’s anchor plan. Court posts and glass supports depend on accurate positions and tolerances, so late changes can cause rework. The same principle applies to lighting columns, access doors, drainage falls, and service routes.

A third mistake is selecting materials only by appearance. A glossy coating, dark frame, or panoramic layout may look attractive, but outdoor durability, glass replacement, fastener corrosion, cleaning access, and spare-part availability have a greater effect on lifecycle value. I recommend treating appearance as one selection criterion rather than the main technical criterion.

How to Optimize the Project for Long-Term Value

I recommend standardizing components across multiple courts whenever the site has a multi-court plan. Common glass dimensions, mesh panels, lighting fixtures, fasteners, and turf specifications can simplify stock management and maintenance training. Standardization may also make it easier to replace one damaged component without redesigning the surrounding court.

Drainage and maintenance access deserve early attention because they are difficult to correct after installation. The site should prevent standing water around the court, allow cleaning access, and provide a practical route for replacing glass or moving maintenance equipment. A clear maintenance schedule should cover turf brushing, infill management, glass cleaning, fastener inspection, coating inspection, and lighting checks.

For a commercial venue, I also recommend planning the customer journey around the court. Reception, changing rooms, toilets, seating, signage, equipment rental, ball storage, and emergency access can influence user satisfaction and operating efficiency. These facilities are outside the court kit, but they should be included in the overall project brief before the layout is finalized.

Conclusion: How to Buy the Right Double Padel Court

The right double padel court starts with the correct definition: a four-player court with a standard internal playing area of approximately 20 m × 10 m. From there, I recommend confirming the applicable FIP requirements, surveying the site, engineering the foundation, selecting suitable glass and metal protection, specifying turf and lighting, and comparing complete quotations. The lowest equipment price is not necessarily the lowest project cost when civil works, logistics, installation, and maintenance are added.

Your next step should be to prepare a project brief containing the installation country, indoor or outdoor location, number of courts, site dimensions, ground condition, desired court type, lighting use, finish, delivery location, and installation requirement. Rayjun can use this information to help structure a B2B quotation and coordinate the relevant metal building material requirements. Before purchase, ask for a dimensioned drawing, bill of materials, foundation information, delivery scope, lead time, warranty conditions, and spare-parts recommendation.

Key takeaways:

• A standard double padel court normally provides a 20 m × 10 m internal playing area.
• The approximate playing surface is 200 m², excluding foundations and circulation space.
• Net height, enclosure arrangement, glass, mesh, turf, lighting, and foundations must be specified together.
• Outdoor projects require particular attention to drainage, wind exposure, ultraviolet exposure, and corrosion protection.
• A reliable purchasing decision depends on a complete scope, technical drawings, transparent exclusions, and a practical installation plan.

Source reference: International Padel Federation, official rules and regulatory resources. Local building, structural, electrical, fire, accessibility, and planning requirements should also be verified with the competent authority before construction.

Are you interested in learning more about double padel court? Contact us today to secure an expert consultation!